- Carl F Groupco Limited -

Carl F Groupco’s emergency hardware supports safety standards


A comprehensive range of panic and emergency
exit hardware is available from Carl F Groupco. Image shows Strand Antipanic gearing (left) and a FUHR emergency exit lock.

Established hardware supplier Carl F Groupco is promoting its extensive range of panic and emergency exit gearing, which meets stringent safety standards for public and commercial installations. A comprehensive technical advisory service, including guidance on standards, is also offered by the company.

Commenting on the importance of offering support to the hardware sector, John Mitchell, Carl F Groupco’s Technical Manager explains:

“It can be time consuming for fabricators to translate standards into hardware selection – recognising this, we ensure that we are well versed in the regulations that impact this process and ensure we are fully equipped to advise customers on the best route to achieve panic or emergency exit doors.

“First, it is important to establish exactly where the door set will be fitted and who will be using it - this will determine what hardware is required to meet regulations. Non-public buildings, for example, where potential users have received full door operation training, require hardware to meet the EN 179 standard for emergency exits. However, if the door is to be fitted to public buildings or other premises where occupants may not be familiar with exit routes and hardware devices, the door will need to meet EN 1125 for panic exit. Carl F Groupco offers hardware solutions to meet the requirements of both of these standards.”

As a long-standing partner of the German lock manufacturer FUHR, products offered by Carl F Groupco include the FUHR 870 and 871 Type 8 emergency exit locks for aluminium, PVCu or timber doors. Proven over 18 years of service, the multipoint locks are capable of achieving EN 1125 panic exit and EN 179 emergency exit requirements: in order to comply, the lock must be used with a tested hardware set, such as the CES free movement cylinder and FUHR panic bar. Carl F Groupco also distributes facefix Strand Antipanic gearing: products offered are the EN 1125 Motorised or Modular Touch Bar, the EN 1125 Modular Push Bar, the EN 179 Modular Push Pad and a lever or knob operated Outside Access device.

For a wide selection of panic / emergency hardware plus advice on regulations and solutions, contact Carl F Groupco, the experts in hardware distribution, services and support.


News title: -    Carl F Groupco’s emergency hardware supports safety standards
Submitted By: -